Accessori Auto Moto

Scout Alzabimbo Auto Cuscino di rialzo anatomico in polistirolo ignifugo. Per il trasporto di bambini da 3 a 12 anni, utilizzando le normali cinture dell'auto. Fodera di rivestimento asportabile e lavabile in materiale autoestinguente. I ganci laterali permettono di fissare il seggiolino con le cinture dell'auto e quindi in caso di urto di rimanere fissato perfettamente alla seduta. Tessuto Cotone.

MAINTENANCE AND BATTERY CHARGER CAR, BIKE AND SCOOTER
Amperomatic Trainer, intelligent charger, 6 / 12V - 0.55 / 1A

Features:
ABS structure completely sealed and waterproof, suitable for outdoor use.
With protection against sparks, short circuits, overheating and reverse polarity.
Universal for all lead batteries, MS, Gel and AGM
Clips for battery and for quick connection rings kit
Microprocessor with 4 different charging modes

Technical specifications:
code 70178
brand Lampa
Model Amperomatic Trainer
Structure ABS Waterproof IP65
Volt 6V / 12V
Battery size 4-120 Ah
Amperage of charge 1.0A (step)
Charge Maintenance 1.0A (step)
Charge Indicator Led
It Management Electronics (microprocessor)
Electronics protection Yes
Upload Auto Selector
IP65 protection class
Height 40 mm
Cm width 165 mm
Depth 55 mm
Section 0.50 mm2 cable clamps
cable length 1700 mm forceps
Power cable length 1700 mm
Weight 0,310 kg
Quick connectors Yes

ARAI AXCESS 2 VORTEX RED
Arai development is a continuous process.
A perfect example of this philosophy is the Axces-II, successor of the already appreciated Axces.
For Axces-II was built a completely new outer shell super fiber (SFC), with the proven large opening for the visor SAI.
It has paid much attention to the improvement and update of the ventilation system.
For Axces II it is specially designed a completely new rear duct.
It increases the extraction of hot and humid air from the inside of the helmet and provides a unique look.
The Axces-II offers all the comfort, fit and protection for which Arai is famous.
Shell in SFL (Super Fiber Laminate) This is the basic Arai outer shell.
The super fiber offers greater comfort than other materials for caps, maintaining strength and lightness.

Ventilation
The single-piece ventilation hole increases the hot and humid air flow extracted from the helmet.
The front socket provides fresh air to the top of the head.
The closable vent hole on the chin controls the airflow in the chin area.
The exclusive brow vents guide the fresh air in the area of ​​the forehead without the need to drill holes in the outer shell or hard coating.

INTERNAL
Pillows interchangeable interior.
The Arai pillows are available in different thicknesses for maximum wearability.
perfectly follow the jaw line, offering a better fit useful to keep the helmet in place even at high speeds.

Comfort
the biggest adjustment knobs.
larger buttons for greater ease of use even when wearing gloves.

Broad vision SAI
The visor system with Super Adsis 'I' of new generation tested in MotoGP has been extended by 5 mm to both sides and offers the widest peripheral vision in the industry for a better performance.

SuperAdSis LRS (Lever Release System)
It allows you to replace the visor in seconds without tools or removal of the side plates.
Cleaning or replacement of the lens is easier than ever.

SIZE L

Transport costs:

Italy: Free
Europe: € 13.00
Extra Eu: € 29.00

ARAI RX-7 V 2017 REPLICA CRUTCHLOW
Full-face helmet Top of the range Fiber

RX-7V represents the maximum expression of know-how, technology and experience gained by Arai in the realization of helmets.
Thanks to a completely redesigned cap in PB-SNC2, the revolutionary system visor VAS (Variable Axis System) and to the fact of having made even more 'smooth and resistant area of ​​the temples, RX-7V imposes itself as a new reference among the helmets Top Gamma.
The new interior in Ecopure, even more 'comfortable, the new profiles of the air intakes and the improvements to the Diffuser ventilation system, showing attention to detail and quality' constructive that always has characterized Arai.
The shape of the cap, which meets the criterion R75 Shape, our engineers have managed to improve the capacity 'of the slide helmet and bounce off obstacles, achieving excellent absorption performance not only at the time of testing, but also in " Real world".
PB-SNC². The new resin used, improves the cohesion between the various layers of fiber, allowing the cap to be more 'resistant but also more' light (about 30 gram).


Technical features:

VENTILATION:
The upper central air intake, provides 11% more 'of ventilation and the new opening / closing of the same system, the user enables an extremely fast and intuitive use.
The Air Channel, force the air injection from the temple area to the lateral ducts.
The new Diffuser, are 20 mm piu 'extended, aerodynamically more' efficient and allow you to enter the 19% more 'of air inside the helmet.
The Airwing, adjustable in five positions, improves the stability 'and reduces the effect buffetting at high speeds'.

NEW SHAPE:
The new cap, completely redesigned according to the criterion R75 Shape, and 'built to be even more' smooth and resistant allowing the helmet to slip on any obstacles, without generating hazardous rotations.
The VAS visor system allows to further lower the opening mechanisms allowing the helmet to boast excellent also absorptions in the area of ​​the temples.

MORE 'SPACE IN THE AREA CHIN:
The new design of the cover, increases the space in the chin area of ​​3 mm.

NEW SYSTEM LOCK VISOR:
Thanks to the experience gained in the championship F1, the locking system visor and 'been completely redesigned.
The system and 'safe and durable as ever before but allows it to be operated with a single extremely fluid and intuitive movement - even with gloves.

NEW SYSTEM VISOR: VAS:
The new system Visor Variable Axis System, has allowed the technicians Arai to reduce the size of the mechanism and the external media, improving not only the performance of the helmet in the event of impact, but also facilitating the substitution of the same, thanks to a procedure piu ' intuitive.

NEW INTERIOR:
The upholstery fabrics and interior design have been completely redesigned, to make the fitting of RX-7V even more 'comfortable. In case of need ', points more' subject to stress are designed to flex or even separate, not to interfere in the absorption of the cap performance.
NEW DIFFUSER: 20 mm more 'long to maximize the aerodynamic efficiency at high speeds'. The front intake holes have been enlarged. The opening / closing system of the air intakes and 'even more' easy to operate and it 'was modified, to improve the quietness' of the helmet even when these are closed.

CONTROLLED FIVE TIMES:
EVERY Arai helmet, and 'subjected to the five Departments Quality Control', which inspect the helmet during the various stages of production. Control of post production cap thickness, post coating control, post assembly control and the other two controls "in-process".

WASHABLE INTERIOR:
All the interiors of Arai helmets are washable (even if mounted) with neutral soap and lukewarm water.

MADE BY HAND:
May take up to 18 hours / man prudurre a single Arai helmet. The construction of one of our shell may also require 27 separate steps and only after five years, our skilled technicians, can claim the right to create an Arai shell.

MAXIMUM COMFORT EVEN FOR ALL DAY:
The interior design, the quality 'of the ventilation system, the perfect balance and distribution of the helmet weights make RX-7V also the perfect companion for long journeys.

REFERRED TO PENETRATION TEST:
All Arai helmets are subjected to penetration tests (with the exception of Freeway-2, Penta, Astro Light and VX-Pro Jr) Although not 'required by European approvals. The Penetration Test conducted by Arai is the impact of a weight of 3kg steel cone from a height of 3 meters on any point of the cap (Air outlets including) above the line

ARAI RX-7 V 2017 HRC HONDA RACING CORPORATION
Full-face helmet Top of the range Fiber

RX-7V represents the maximum expression of know-how, technology and experience gained by Arai in the realization of helmets.
Thanks to a completely redesigned cap in PB-SNC2, the revolutionary system visor VAS (Variable Axis System) and to the fact of having made even more 'smooth and resistant area of ​​the temples, RX-7V imposes itself as a new reference among the helmets Top Gamma.
The new interior in Ecopure, even more 'comfortable, the new profiles of the air intakes and the improvements to the Diffuser ventilation system, showing attention to detail and quality' constructive that always has characterized Arai.
The shape of the cap, which meets the criterion R75 Shape, our engineers have managed to improve the capacity 'of the slide helmet and bounce off obstacles, achieving excellent absorption performance not only at the time of testing, but also in " Real world".
PB-SNC². The new resin used, improves the cohesion between the various layers of fiber, allowing the cap to be more 'resistant but also more' light (about 30 gram).


Technical features:

VENTILATION:
The upper central air intake, provides 11% more 'of ventilation and the new opening / closing of the same system, the user enables an extremely fast and intuitive use.
The Air Channel, force the air injection from the temple area to the lateral ducts.
The new Diffuser, are 20 mm piu 'extended, aerodynamically more' efficient and allow you to enter the 19% more 'of air inside the helmet.
The Airwing, adjustable in five positions, improves the stability 'and reduces the effect buffetting at high speeds'.

NEW SHAPE:
The new cap, completely redesigned according to the criterion R75 Shape, and 'built to be even more' smooth and resistant allowing the helmet to slip on any obstacles, without generating hazardous rotations.
The VAS visor system allows to further lower the opening mechanisms allowing the helmet to boast excellent also absorptions in the area of ​​the temples.

MORE 'SPACE IN THE AREA CHIN:
The new design of the cover, increases the space in the chin area of ​​3 mm.

NEW SYSTEM LOCK VISOR:
Thanks to the experience gained in the championship F1, the locking system visor and 'been completely redesigned.
The system and 'safe and durable as ever before but allows it to be operated with a single extremely fluid and intuitive movement - even with gloves.

NEW SYSTEM VISOR: VAS:
The new system Visor Variable Axis System, has allowed the technicians Arai to reduce the size of the mechanism and the external media, improving not only the performance of the helmet in the event of impact, but also facilitating the substitution of the same, thanks to a procedure piu ' intuitive.

NEW INTERIOR:
The upholstery fabrics and interior design have been completely redesigned, to make the fitting of RX-7V even more 'comfortable. In case of need ', points more' subject to stress are designed to flex or even separate, not to interfere in the absorption of the cap performance.
NEW DIFFUSER: 20 mm more 'long to maximize the aerodynamic efficiency at high speeds'. The front intake holes have been enlarged. The opening / closing system of the air intakes and 'even more' easy to operate and it 'was modified, to improve the quietness' of the helmet even when these are closed.

CONTROLLED FIVE TIMES:
EVERY Arai helmet, and 'subjected to the five Departments Quality Control', which inspect the helmet during the various stages of production. Control of post production cap thickness, post coating control, post assembly control and the other two controls "in-process".

WASHABLE INTERIOR:
All the interiors of Arai helmets are washable (even if mounted) with neutral soap and lukewarm water.

MADE BY HAND:
May take up to 18 hours / man prudurre a single Arai helmet. The construction of one of our shell may also require 27 separate steps and only after five years, our skilled technicians, can claim the right to create an Arai shell.

MAXIMUM COMFORT EVEN FOR ALL DAY:
The interior design, the quality 'of the ventilation system, the perfect balance and distribution of the helmet weights make RX-7V also the perfect companion for long journeys.

REFERRED TO PENETRATION TEST:
All Arai helmets are subjected to penetration tests (with the exception of Freeway-2, Penta, Astro Light and VX-Pro Jr) Although not 'required by European approvals. The Penetration Test conducted by Arai is the impact of a weight of 3kg steel cone from a height of 3 meters on any point of the cap (Air outlets including) above the line

ARMREST STORAGE AUTO POCKET COMFOR RELAX

custom armrest.
Easy to install (no need for holes), it is available in a wide range of models.
Product with high quality materials, comfortable, can be rotated as needed upward in the rest condition.
Easy installation without drilling any part of the car

SPECIFIC for ALFA ROMEO Alfa 155
Cod. 158015

ARMREST STORAGE AUTO

POCKET COMFOR RELAX

 

custom armrest.

 

Easy to install (no need for holes), it is available in a wide range of models.

 

Product with high quality materials, comfortable, can be rotated as needed upward in the rest condition.

Easy installation without drilling any part of the car

BACKPACK MOTORCYCLE WATERPROOF
Eigo Wet Black / Yellow-Fluo
Totally waterproof, and durable luggage with welded and roll-closing mechanism closed.

Main features:
- Durable and durable backpack
- Fully waterproof with taped seams
- Locking mechanism to roll
- Reflective logos and details fluo
- Front zipper compartment
- Padded shoulder straps
- Capacity: 30 liters